home *** CD-ROM | disk | FTP | other *** search
- Path: toad.stack.urc.tue.nl!not-for-mail
- From: jaco@stack.urc.tue.nl (Jaco Schoonen)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: CyberVision FAQ
- Date: 9 Feb 1996 05:09:16 +0200
- Organization: MCGV Stack, Eindhoven University of Technology, the Netherlands.
- Message-ID: <4fedss$p57@toad.stack.urc.tue.nl>
- References: <823356989.3378@alladin.demon.co.uk>
- NNTP-Posting-Host: toad.stack.urc.tue.nl
- X-Newsreader: TIN [version 1.2 PL2]
-
- Action Jackson (ajackson@alladin.demon.co.uk) wrote:
- : I got my CV64. Installed it. But having problems
-
- : With the CV64 in my machine the machine Hangs after a while (5 min
- : max). Without it its OK.
- : If I reboot the machine then still no joy. Trys to access the HD and
- : then hangs (nothing on 1084 or Idek).
-
- : I have the 1084 plugged into the Amiga 23pin port & Idek MF-8317 to
- : the CV64.
- : I have to enable JP1 (Slow buster) or else CV64 does not work at
- : all... I do have Buster 11. I could not find any indication as to what
- : A3640 ver it was (I thought I had 3.1 but cant be sure.)
-
- : CV64 does work. I get the logo. And even can run the Emulation for a
- : while but then it hangs (ususally on Disk Access when the pointer is
- : busy).
-
- Try changing your resolution to something with a smaller bandwidth. You can
- select more than actually possible in CVMode. When sliding back the 'pixel
- clock'-slider a little you get a stable system. This is especially true for
- 16/24bot modes where you shouldn't go above 100/50 Mhz....
-
- In 8bit you'll get a software pointer when going above 110Mhz.
-
- Hope this helps,
-
- --
- Jaco Schoonen
- (jaco@stack.urc.tue.nl)
-